Loading The Bottom Rack; Adjusting Rack Height - Electrolux 154671201 Guide D'utilisation Et D'entretien

10
Preparing & Loading Dishes
NOTE
Features in your dishwasher's model may vary in
appearance from illustrations in this manual.

LOADING THE BOTTOM RACK

Our adjusted rack space allows you to put items up
to 15" in the bottom rack.
The bottom rack is designed for plates, saucers,
bowls, and cookware.
• Large items should be placed along the
• For best results, place bowls,
toward the center. Tilt slightly for better
• Make sure tall items do not block
• Be sure pan handles do not
protrude through the bottom of the
10 place settings standard loading pattern
14 place settings standard loading pattern
edge so they do not block the middle
spray arm rotation.
casserole dishes,and sauce pans
with soiled surface facing down or
drainage.
middle spray arm rotation.
rack and block the lower spray arm
rotation.
Fold-down Tines
The fold-down tines in the lower rack and upper
rack make easy loading for those extra large and
hard-to-fit items. The tines may be left up for
normal use or folded down for more flexible loading.
Fold tines down for ease in loading large pots or
pans.

ADJUSTING RACK HEIGHT

The top rack height can be easily adjusted to
accommodate loading taller dishes in either rack.
Height should be adjusted without dishes in the
racks.
To accommodate taller dishes in the bottom rack,
there are 3 positions available:
To raise the rack to the middle or upper
position, simply lift the rack. The lever is
spring loaded to engage the middle or
upper position. To lower the rack to the
middle or lower position, push the lever
with your thumbs and pushing downward
simultaneously. Releasing the lever will all
the middle position to be engaged. To
ensure ease of adjustment when adjusting
the rack, ensure that the rack remains level
from front to back with both sides at the
same height.