Kenwood KDC-X700 Mode D'emploi page 10

HD Radio™ tuner
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station or channel.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
is automatically canceled.
Select an HD Radio multicast channel
Many HD Radio stations offer more than one channel programming.
This service is called multicasting. While receiving HD Radio multicast
channels....
Press S / T to select your desired channel (HD1 to HD8).
"LINKING" appears while linking to a multicast channel.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
6
TUNER SETTING
IF BAND
2
, Direct Access Tuning
AUTO MEMORY
RECEIVE MODE
CLOCK
TIME SYNC
.
AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not
be degraded and the stereo effect will remain.
YES: Automatically starts memorizing 6 stations with good reception. ;
NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)
Sets the receive mode of the HD Radio receiver.
AUTO: Automatically tunes to analog broadcast when there is no
digital broadcast. ; DIGITAL: Tunes in to digital broadcast only. ;
ANALOG: Tunes in to analog broadcast only.
ON: Synchronizes the unit's time to the Radio Broadcast Data System
station time. ; OFF: Cancels.
Default: XX