Whirlpool WFW81HE Guide D'utilisation Et D'entretien page 11

8.
Select CYCLE*
Appearance may vary.
Turn cycle knob to select your wash cycle. See "Cycle Guide"
for details on cycle features.
9.
Adjust settings, if desired*
Appearance may vary.
The display will show the default settings for the selected cycle.
To adjust a setting, touch its name – Wash Temp, Spin, or Soil.
Adjusting settings will change the Estimated Time Remaining.
Tightly packing the load, unbalanced loads, or excessive suds
may also cause the washer to increase the cycle time.
10.
Select any additional options*
Appearance may vary.
To add an option to the cycle, touch its name – Extra Rinse,
TumbleFresh, or Cycle Signal. To remove an option from
the selected cycle, touch the option again.
11.
Setting a delayed wash
Appearance may vary.
If you do not want to begin a cycle immediately, you may
choose the DELAY WASH option. This will delay the start
of the wash cycle by up to 12 hours.
To set a delayed wash:
1. Touch DELAY WASH + and – buttons to set the desired
delay time.
2. Touch and hold START to set the delay. The delay
countdown has started when the START light stops blinking.
* Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
11