Publicité
Compliance with FCC rules (USA only)
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC WARNING
You are cautioned that any changes or modifications not expressly approved in this manual could void your
authority to operate this equipment.
Canada only
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme á la norme NMB -003 du Canada.
AT2020 USB Cardioid Condenser Microphone
Introduction
Thank you for buying the Audio-Technica AT2020 USB cardioid condenser microphone. Designed
for computer-based recording, this microphone is ideal for digitally capturing music or any acoustic
audio source using your favorite recording software.
Equipped with a USB digital output, the AT2020 USB offers studio-quality articulation and
intelligibility perfect for home studio recording, field recording, podcasting, and voiceover use.
Based on the design of Audio-Technica's critically acclaimed AT2020 cardioid condenser
microphone, The AT2020 USB features a low-mass diaphragm, custom-engineered for extended
frequency response and superior transient response. Audio-Technica's state-of -the-art design and
manufacturing techniques ensure that the microphone complies with the company's renowned
consistency and reliability standards.
Features
• Side-address studio condenser with USB digital output
• Ideal for podcasting, home studio recording, field recording, and voiceover use
• Compatible with Windows and Mac
• Custom-engineered low-mass diaphragm provides extended frequency response and
superior transient response
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving
isolation of desired sound source
• Low self-noise – perfectly suited for sophisticated digital recording equipment
• Pivoting, threaded stand mount attaches securely for easy and precise placement of
the microphone
• Tripod desk stand with folding legs for secure and easily portable tabletop use
Mac and GarageBand are trademarks of Apple Inc., registered in the U.S. and other countries.
Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
2
Setting up your microphone with included pivot
mount and tripod desk stand
1. Screw the pivot mount onto the top of the tripod desk stand.
2. Place the tripod desk stand on a flat surface. (The tripod legs will extend to provide
a wide, secure base.)
3. Install the AT2020 USB microphone into the threaded collar of the pivot mount
and tighten collar while holding the microphone in place. The front of the microphone
should be facing the sound source. (A USB icon and blue LED indicate the front of the
microphone; the product model number is displayed on the rear of the microphone.)
4. If necessary, adjust the microphone's angle with the pivot mount's thumbscrew.
5. Plug the provided USB cable into the USB digital output at the base of the microphone.
Preliminary setup with Mac OS X
1. Plug the free end of the provided USB cable into the USB port on your computer. The
microphone's blue LED will illuminate, indicating the microphone is receiving power.
Your computer will automatically recognize the USB device and install a driver.
2. To select the AT2020 USB as your audio input, first, open your
EN
System
Preferences.
3
Publicité
