Technical Description; Installing The Breathe Easy - Dometic Breathe Easy Mode D'emploi

_BreatheEasy_A5.book Seite 24 Dienstag, 24. Januar 2012 3:31 15

Technical description

The device is operated with 12 Vg. Connect it to a 100 – 240 V power supply
using only the power adapter (SKU 9108694411) provided.
6 Technical description
No. in
fig. 1, page 3
1
2
3
4
5
6
No. in
fig. 2, page 3
1
2
3
7

Installing the Breathe Easy™

When selecting the installation location, observe the following instructions:
 The device is designed for rooms with an area of up to 500 sq. ft. (46 m²).
 Select a location where the air flow is not impaired.
 Do not install the device in rooms where flammable materials are stored
or flammable gases may accumulate.
 Do not install the device near the inlet or outlet of an air conditioning
system.
 Keep the power cable away from hot surfaces.
 Install the device on a flat, smooth surface.
24
Designation
Fan
Removable nano-mesh divider
Ultraviolet lamp
Non-removable nano-mesh strips
Lamp socket
Safety switch
Designation
Power/Fan-speed switch
Connection socket
Maintenance sticker
Breathe Easy™
EN