Connection Of The Audio Source (Bluetooth®); Requirements Of The Source Devices - Teuco SEASIDE 641 HA Mode D'emploi

CONNECTION OF THE AUDIO SOURCE (BLUETOOTH®)
Follow these steps to carry out the Bluetooth®
audio connection between the amplifier and an
audio source equipped with a Bluetooth® A2DP
transmission signal:
• Switch on the amplifier (with the loudspeakers
connected) .
• Switch on the source device and activate the
Bluetooth® function .
• If a connection confirmation is requested, digit the
pairing code: 0000 .
• Play an audio track via the player of the source
device .
In the case of source devices such as mobile
p h o n e s , i t i s n e c e s s a r y t o c a r r y o u t t h e
synchronisation of the Bluetooth® devices utilising
the device research function .
For further information, refer to the instruction
manual of your telephone .

REQUIREMENTS OF THE SOURCE DEVICES

To function correctly with the amplifier, the source
device must have the following characteristics:
• Communication protocol: Bluetooth® 2 .1 or
previous .
• Profiles: A2DP, AVRCP .
• Band frequency: 2 .4 GHz .
• Range: Class 2 - 10m .
• Audio volume control .
641 HA
®
hi-fi
EN
11