ION Air LP Guide D'utilisation page 5

Masquer les pouces Voir aussi pour Air LP:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Pairing Air LP to a Bluetooth Speaker
Air LP has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power on the Air LP turntable.
3. Press and release the Bluetooth button on Air LP to start pairing to your Bluetooth device. Once Air LP is
connected to the Bluetooth speaker, the Bluetooth LED will be solid blue. Your Bluetooth speaker should
also indicate that its paired.
Note: Air LP will connect to the closest Bluetooth speaker that is near it. If after 5 minutes no Bluetooth
speaker can be found to pair with, the Bluetooth transmitter will become inactive and the LED will turn off.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
4. Play music on your Air LP turntable. If you are connected to a Bluetooth speaker with a play/pause
button, and do not hear audio, try pressing the play/pause button.
5. Adjust the volume on your Bluetooth device.
6. To disconnect pairing, power off the Air LP turntable or turn of Bluetooth pairing on your Bluetooth
speaker.
Note: Move other Bluetooth receivers/speakers out of range of Air LP (30'/9.1m or more) or turn them off to
connect to your Bluetooth speaker.
Using Air LP With Your Computer
Recording
To record music to your computer, you can use ION EZ Vinyl/Tape Converter and a USB cable.
EZ Vinyl/Tape Converter conveniently saves your recordings to your computer. After you finish
converting your vinyl, you can then burn to CD or load onto portable media devices.
To install the software, insert the included CD into your computer, and follow the on-screen
instructions.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to
connect Air LP's USB port to an available USB port on your computer.
2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All
Programs (Windows) or the Applications menu (Mac).
3. Follow the on-screen instructions to set up your recording. When prompted to play your
music, move Air LP's tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers, or
connect Air LP's RCA outputs to a stereo system or powered speakers. Do not connect
them to phono-level inputs; Air LP's RCA outputs are line-level and could damage a device
with phono-level inputs.
4. When you have finished recording, raise Air LP's tonearm from the record and return it to its
arm clip.
Visit ionaudio.com/computer-optimization for more information on optimizing your computer
for audio.
Playback
You can listen to the music on your computer through its internal speakers or through
headphones connected to it. (Air LP cannot be used as a playback device for your computer's
audio.)
To listen to a record while it's playing, listen through your computer's speakers, or connect Air
LP's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-
level inputs; Air LP's RCA outputs are line-level and could damage a device with phono-level
inputs.
5

Publicité

Table des Matières
loading

Table des Matières