ATTACHING THE BASE FOR USE AS A DESKTOP OR TABLE TOP FAN
Rotate the fan clamp so the clamp faces forward, then slide the the base onto the fan as shown in Figure 2.
OPERATING YOUR FANFAIR FAN
ADJUSTING THE FAN POSITION
Your FanFair fan can be adjusted both vertically and horizontally. Loosen the clamp screw, then adjust the tilt
and horizontal angle as shown in Figure 3. Tighten the clamp screw once you have pointed the fan in the desired
direction.
OPERATING THE FAN
Your FanFair fan features a rotary speed control on the back with two speeds: Low (position 1) and High (position
2). See Figure 4. To stop the fan, set the speed control switch to the Off (0) position.
Figure 2
Figure 3
Figure 4
5