Important Safety Instructions - Impecca FanFair FPF-600 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS

PLEASE SAVE THESE INSTRUCTIONS. YOU MAY NEED THEM IN THE FUTURE.
Here are some basic safety precautions that you should carefully follow as you use your new FanFair Floor Fan.
Read all instructions carefully! Impecca is not responsible for damage or injuries caused by improper use of the
appliance.
1. Read and save these instructions.
2. Do not connect the fan to the power supply until the fan is FULLY assembled.
3. Do not connect to any power supply other than 110-120V/60Hz.
4. Never operate the fan if it has damaged or worn parts. It should be returned to the manufacturer, service
agent or a similarly qualified person for repair in order to avoid a hazard.
5. Always position the fan on a stable, level surface.
6. Do not spray anything into the fan.
7. Do not use the fan near flammable areas or substances.
8. To reduce the risk of electric shock, do not remove any screws.
9. Do not insert fingers or other objects through the fan guard.
10. Do not remain in the direct wind path of the fan for long periods of time.
11. Keep electrical appliances out of reach from Children or infirm persons. Please do not let them use the
12. appliances without supervision.
13. Ensure that the fan is switched off from the supply mains before removing the guard.
14. Unplug or disconnect the appliance from the power before servicing and cleaning.
15. Clean the fan with soft cloth and neutral detergent, but not gasoline or other solutions.
16. Add a few drops of high quality lubricating oil to the bearing of the motor before the first operation every
year.
17. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
18. This Fan has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
19. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be
removed. Discard product if the attachment plug is damaged.
20. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility
for examination and/or repair.
21. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do
not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be
tripped over
WARNING: To reduce the risk of fire or electric shock, Do not use this fan with any solid-state speed control
device.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
3

Publicité

Table des Matières
loading

Table des Matières