Operating The Fan; Care, Cleaning, And Maintenance - Impecca FANFAIR FCF-8050 Guide De L'utilisateur

OPERATING THE FAN

1. Set the fan on a level and dry surface (unless it is mounted).
2. Make sure the speed control is at the OFF or 0 position. Plug
the power cord into the socket.
3. To run the fan, rotate the knob to the desired speed:
Low (1), Medium (2), or High (3).
4. Adjust the fan to the desired angle by moving the head up
or down.
5. After turning the fan off, always be sure to unplug it from the
electrical outlet.

CARE, CLEANING, AND MAINTENANCE

1. Be sure the fan control is in the "0" or "OFF" position and that the fan is
unplugged before cleaning.
2. Access the fan blade by removing the front grill and the securing screw.
3. Clean the fan blade, front and rear grills gently with a soft, moist cloth.
4. Replace the blade. Tighten the securing screw and securely fasten the front
grill.
• DO NOT immerse the fan in water. Never allow water to enter the Motor Housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
8