A&D EK-i Série Guide De Démarrage Rapide page 10

EN る
Low battery
Warning to indicate that the battery pack (OP-09) is discharged. Immediately stop
using it, and recharge or use the AC adapter.
AC adapter error
Warning to indicate that the output voltage of the AC adapter is too high. Check if
the AC adapter is correct.
AC adapter error
Warning to indicate that the output voltage of the AC adapter is too low. Check if
the AC adapter is correct.
Stability error
Warning to indicate that the weight value is not stable and the balance cannot display
it. Prevent vibration and drafts. Press the
mode.
Internal errors (# =
The balance detects error state in the internal processing. With nothing on the
weighing pan, turn the power OFF and ON again. If the error persists, request service.
If you cannot cancel an error or other errors have occurred, request service from the store where
you purchased the balance or from your local A&D dealer.
, , or )
10
key to return to the weighing