Network Connection - Comelit IPPTZ120IR Manuel D'utilisation

•
Connect related cables according to need (Power line, network line, audio line etc.)
•
Connect the power supply
Note:
•
Please read the user manual carefully before the installation.
•
Make sure to turn off all the power when install the camera
•
Please confirm the power transformer, avoid the device damage with unmatched power source

Network connection

•
LAN connection
Use one network line to connect Network High Speed Dome with a switch of the LAN.
•
WAN connection
Use one network line to connect Network High Speed Dome with a Router or XDSL Modem/Cable Modem as shown bellow.
•
Connect the power supply
After connect the power source, the network camera will start operation automatically.
Figure 3
Insert Micro SD card following
the direction shown in Figure 4
Figure 4
TF card slot
3