Encoding; Camera Set - Comelit IPPTZ120IR Manuel D'utilisation

Contrast: Adjust the contrast for the channel
Saturation: Adjust the saturation for the channel
Hue: Adjust the hue for the channel
Title Location: Set the channel title location for the channel
Date Adjustment: Set the channel date location for the channel
Cyclotron arrow: Restore the default parameters
After all parameters setting completed, click "Save" and the it comes into effect immediately.

Encoding

Network High Speed Dome "Encoding" setting interface as figure 3-14.
Compress type: Main Stream (Normal)/ Sub Stream/ Main Stream (Event) selectable
Stream: Including complex stream/ video stream two types
Resolution: According to the camera, how the camera resolution type supported, the corresponding resolution will selectable
Bitrate Type: Constant/ Variable selectable
Bitrate: Set different bitrate for different channels
Frame Rate: Select different frame rate in the drop-down list,, default is "Full Frame"
Quality: Select different image quality according to your need, default is "Highest"
Video Encode: H.264/ MJPEG two kinds of video encode format
I frame Interval: Set the I frame internal time
After all parameters setting completed, click "Save" and the it comes into effect immediately. ( "Setup" setting will change the
camera parameters directly)

Camera set

Network High Speed Dome "Camera set" setting interface as figure 3-15.
Figure 3-14
12