Mounting - Sonnenkonig CHAMA 30301212 Mode D'emploi

03 - MOUNTING

Chain
ON/OFF switch
Heating
element
1. The heater must be installed by a qualified electrician.
2. Place the heater on a solid, level ceiling surface; install the
heater on a stable, rigid support (e.g., solid wood beams or me-
tal rails, etc.).
3. The ceiling hook that suspends the patio heater must be able to
support 3 or 4 times the weight of the patio heater itself.
4. Place hook A around the ceiling hook and attach any chain ring
to adjust the height of the patio heater to the floor.
5. The distance from the bottom of the patio heater to the floor
should be greater than 5 feet.
6. Connect the patio heater to a 15 amp, 220-240 V, 50 Hz, groun-
ded electrical outlet.
7. Only operate the unit when it is in the upright position.
Remote control
Heater cover
Protection
element
Touch switch
EN
35