Lindy 38120 Manuel Utilisateur

HDMI High Speed Digital Signage Extender
User Manual
Benutzerhandbuch
Manuel Utilisateur
Manuale d'uso
LINDY No. 38120
www.lindy.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (JUNE 2010)
User Manual
Introduction
Thank you for purchasing the LINDY HDMI High Speed Digital Signage Extender 100m! It
supports uncompressed FullHD 1080p HDMI signal transmission with high resolution for
computer graphics as well as for fluent video transmission! This Extender allows you to extend
signals up to 100m using high quality Cat.6/Cat.7 RJ45 cable. For best results and especially
longer distances, we recommend using our Cat.7 S/FTP PiMF cable (No.12047).
This extender functions as a HDMI over Cat.6 extender, RS232 extender, Infrared over Cat.6
Extender and as a 3 Port Ethernet Switch extender.
Package Contents
1 x Transmitter, 1 x Receiver
English
Multi-Country Power Adapter (100...240VAC / 24V DC/1A)
Deutsch
IR Transmitter with 1.5m cable
Français
This User Manual
Italiano
Features
Extends uncompressed HDMI or DVI-D signals up to 100m via its "Gigalink" connection
HDMI FullHD 1080p or DVI-D up to 1920 x 1200 (using a HDMI to DVI adapter or cable)
Supports 10/100 Base-T Ethernet via the "Gigalink" connection (2x 3 Port 10/100 Ethernet)
Supports hardware RS232 link function and Infrared remote signal transmission
Supports a local HDMI monitor at the transmitter
Suitable for use with 3D/HDTV Home Theater, professional HDTV installations, Computer
Systems, Multimedia and Control Center system installations.
Specification
Max. 12Gbit/s. total bandwidth over its 800MHz "Gigalink" connection using RJ45 cable. The
"Gigalink" connection is a dedicated cable connection, it is not a Gigabit Ethernet
connection!
Compatible with HDMI 1.2, 1.3a/b/c, 1.4 and DVI 1.0 with HDCP, up to 10.2 Gbps / 340MHz
per link
FullHD 1080p with up to 36/12 bit colour depth with 3D support and HDMI CEC support
Supported resolutions: 640x480i, 720x480i/p, 720x576i/p, 1024x768, 1280x720i/p,
1280x960, 1280x1024, 1600x1200, 1920x1080i/p, 1920x1200
Supported audio: multi-channel including all HDMI supported protocols, DTS-HD Master
Audio, Dolby Digital Plus, Dolby TrueHD
IR sensor on TX unit and IR transmiter on RX unit with up to 15m signal distance
RS232 DB-9 Connector on TX and RX with Bi-directional transfer up to 192000 Bit/s
Transmitter and Receiver each have a 3 RJ45 ports switch for 10/100 Ethernet support. The
10/100 switches are also connected via the "Gigalink" connection
The receiver is powered via the "Gigalink" connection from the transmitter
Dimensions: 15 x 7 x 5cm (L x W x H) ; Weight: 0.46kg (each unit)
Maximum cable length for the "Gigalink" connection: 100m (approx.)
2
English