Usb Operation - Akai AM-301W Manuel D'utilisation

USB OPERATION

You can enjoy media files saved on an USB device by connecting the USB device
to the USB port of the unit.
1. Connect the USB device to the USB port of the unit.
2. Select the USB MODE by pressing CD/USB on your remote control
/ /  
3. Select a file you want to play using CH+, CH-, /FF, / FF+ directly thanks to
number keys.
4. Press on remote control or on the unit to start the playback.
5. Turn the VOLUME knob or press to increase or decrease volume level.
VOL+ / VOL-
6. Press „ stop button on unit or on remote control to stop USB playback.
7. Before disconnecting the USB device, change the source by pressing SOURCE button.
Compatible USB Device:
Mp3 player: Flash type Mp3 player.
USB Flash Drive: Devices that support USB2.0 or USB 1.1.
The USB function may not be available depending on device.
Device which require additional program installation when you have connected it to a computer, are
not supported.
Do not extract the USB device while in operation.
For a large USB capacity, it may take longer than a few minute to be searched.
To prevent data loss, back up all data.
If you use a USB extension cable or USB hub, the USB device is not recognized.
Using NTFS file system is not supported. (Only FAT (16/32) file system is supported)
This unit is not supported when the total number of files is 1000 or more.
External HDD, locked devices or hard type USB devices are not supported.
PROGRAM MODE
The operation of PROGRAM MODE are as the same as that of CD / MP3. Please refer to CD / MP3
OPERATION section paragraph PROGRAM.
29