VDO KIMAX Notice De Montage Et D'utilisation page 50

Calibration
Setting alarm value A2
• Press the key.
• With the key, set the desired alarm value.
(Example: display reads
11.5 tonnes)
• To save the A2 value, press the
oder
• If you do not want to save the value, press the
key.
DP
3
now appears on the display.
Placing the decimal point
• Press the key.
• With the key, adjust the position of the
decimal point.
00.0
(Example: for the above calibration valu-
es)
• To save the position, press the
oder
• If you do not want to save the new position,
press the key.
U5
3
now appears on the display.
24
115
at alarm value
key.
key.
TU00-0880-1024450
Setting display mode U5
• Press the key.
• With the key, set the desired display mo-
de.
- Mode 000 = cab operation (display automati-
cally switches off after about two minutes)
- Mode 111 = trailer operation (continuous dis-
play)
• To save the mode setting, press the
oder
• If you do not want to save the new setting,
press the key.
• Now press the
rating mode.
key to return to normal ope-
KIMAX
key.