inus UB-7035R Mode D'emploi page 13

Press again to stop. Do not use sharp
items to press buttons.
Left side
- When the unit is occupied during the
economy mode, the temperature of
the water and seat will be returned to
the original setting and go back to the
economy mode after each use.
• Red light: Normal mode.
• Green light: Economy mode.
• Off: Power off.
- Unplug and contact customer center
immediately.
Sitz Bath (Healthy Wash)
- Press this button to activate soft and warm water spray (water temperature
LeD light
level 3, water pressure level 1) for washing and massaging.
- Feminine nozzle will operate 3 minutes and will stop automatically.
- Press this button again during this function to switch between normal washing
and washing with oscillation.
IIP (Intensive Impulse Pulsation)
- Press "SITZ BATH/IIP" twice within one second to activate IIP function to have
easy defecation. It works for 60 seconds and stops automatically.
- Press "IIP" button again to change the frequency of the pulsation mode (3
different modes available). Initially water pressure is set to level 5.
Water temperature adjustment
- Press the button to adjust water temperature to Room temp-Low-Mid-High.
- LeD lamp will indicate the level:
Room temp: LeD is off
Mid temp: 2 LeD is on
Water pressure / Dry temperature
- Water spray pressure is adjustable to the desired pressure by pressing
- Temperature of dry is adjustable to the desired temperature by pressing
- Both levels will be initialized (level 3) after each use.
Nozzle position
- nozzle position is adjustable by pressing
when being used. Position will be initialized (level 3) after each use.
Seat temperature adjustment
- Press the button to adjust seat temperature to Room temp-Low-Mid-High.
- LeD lamp will indicate the level:
Room temp: LeD is off
Mid temp: 2 LeD is on
Automatic deodorization
- When the appliance is in use, the deodorizer will work automatically.
- When a user stands up, it stops after 60 seconds.
Caution
Be aware of not dropping the remote control in water. It may cause malfunction.
All functions will be operational when the seat is occupied except
Nozzle cleaning, Power/Economy.
Before operating, ensure that the water tank is filled up completely.
Low temp: 1 LeD is on
High temp: 3 LeD is on
button from 1 to 5 when being used.
button from 1 to 5 when being used.
Low temp: 1 LeD is on
High temp: 3 LeD is on
(max 20 minutes)
button from 1 to 5 positions
11