inus UB-7035R Mode D'emploi page 12

6 How to use
Cleansing
- Press "Cleansing" to clean your posterior. The function will stop in 60 seconds
automatically.
- Cleansing function can be activated in 3 modes:
Press the button 1st time: normal cleansing.
2nd time: Cleansing with oscillation to widen cleansing area.
3rd time: Cleansing with oscillation and pulsation.
4th time: normal cleansing again.
Bidet
- Press "Bidet" for feminine wash. The function will stop in 60 seconds automatically.
- Bidet function can be activated in 3 modes:
Press the button 1st time: normal washing.
2nd time: Washing with oscillation.
3rd time: Washing with oscillation and pulsation.
4th time: normal washing again.
Kids
- Press "Kids/Auto" to change all functions to be suitable for children.
The following settings will be selected:
• Oscillation: 1 min
• Water pressure level 1
- Press this button again to activate different modes:
Cleansing with oscillation, Cleansing with oscillation and pulsation,
normal cleansing.
- Children should use this unit under adult supervision.
Auto
- Press "Kids/Auto" button twice within one second to activate the automatic
function. The following settings will be selected:
- normal cleansing (20 sec), Cleansing with oscillation (20 sec),
Cleansing with oscillation and pulsation (20 sec), Drying (3 min).
Stop function will operate consecutively.
Dry
(warm air)
- Press "Dry" button. The dryer nozzle comes out and drying function will
operate during 3 min.
- Press this button again to switch between Soft and Turbo drying modes.
Stop
- Press "Stop" to stop current operation.
- When a user stands up, all operations will stop automatically.
10
UB-7035R
• Drying: 3 mins.
• Nozzle position level 5
When the power is plugged in initially, nozzles for
feminine wash an posterior will come out in turn.
All the operating times indicated are approximate.
LeD light
- Use side control buttons on the unit when
- While seated, press "Cleansing" on the
Power / Economy
- Press "Bidet" on the left side panel to
- In the economy mode, temperature of
Self-diagnosis system
- This appliance has a self-diagnosis
- If the appliance experiences a problem,
Self cleaning
- This appliance automatically cleans
Side control buttons
the remote control is broken or the charge
of batteries is low.
right side or "Bidet" on the left side to start.
Right side
select Power on/off or economy mode.
the seat will be kept to 30 °C.
system.
the power LeD will blink.
its nozzles before and after every use
(see p. 12).