Braven FUSE Guide De Démarrage Rapide page 4

PAIRING WITH
BLUETOOTH
1. On the BRAVEN FUSE, press and hold either
the BTo1 or BTo2 button for 2-3 seconds until
the blue indicator light begins flashing rapidly.
2. On your BRAVEN speaker, press and hold
the PLAY button until you hear the BRAVEN
pairing sound.
3. After a few seconds, the indicator light on the
BRAVEN FUSE will stop blinking and remain
lit, indicating it has been paired.
Note: The FUSE can also be directly
connected to your speaker through the
Auxiliary output.
4
OUTPUTS
®
CHARGING YOUR BRAVEN
• To charge your BRAVEN, plug the included
USB-to-Micro-USB cable into a wall power
adapter (not included) or into a powered USB
port on a computer. Plug the Micro-USB
connector end of the cable into the BRAVEN
charging port.
• Before using your BRAVEN for the first time,
charge the unit until the battery charging
indicator light turns off, indicating a full charge.
Full manual and troubleshooting: braven.com/manuals