Braven FUSE Guide De Démarrage Rapide page 3

TURN ON
Press the power button
for 2-3 seconds to turn on
your BRAVEN FUSE. Press
the same button again for
2-3 seconds to turn your
BRAVEN FUSE off.
1. Activate Bluetooth
pairing with (see your device's instruction manual for
information on activating it's Bluetooth
2. Press the BTi1 or BTi2 pairing button on the
BRAVEN FUSE for 2-3 seconds until the blue
indicator light begins flashing.
3. In your Bluetooth
select either "FUSE IN1" or "FUSE IN2" in order to
pair the devices.
NOTE: BTi1 is the device connected to the FUSE IN1,
and BTi2 is the device connected to FUSE IN2.The
controls for each connected device are labeled on the
device as BTi1 or BTi2.
Normal use distance is about 20cm
on the phone or device you are
®
®
device's settings, locate and
®
settings).
.
3