Parts; Getting To Know Your Air Fryer; Function Buttons; Operating Buttons - Ninja Foodi MAX AF400EU Notice D'utilisation

Masquer les pouces Voir aussi pour Foodi MAX AF400EU:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10

PARTS

Air Outlet
(located on back)
Non-stick
Crisper Plates
(One for each drawer)
5 ninjakitchen.eu
Air Intake Vent
Control Panel
Main Unit
Non-stick Drawers
(One for each zone)

GETTING TO KNOW YOUR AIR FRYER

When setting time, the digital display shows HH:MM.

FUNCTION BUTTONS

MAX CRISP: Best for cooking smaller
quantities of frozen food such as French
fries and chicken nuggets, which may need
a high temperature.
AIR FRY: Use this function to give your food
crispiness and crunch with little to no oil.
ROAST: Use the unit as an oven for tender
meats and more.
REHEAT: Revive leftovers by gently warming
them, leaving you with crispy results.
DEHYDRATE: Dehydrate meats, fruits and
vegetables for healthy snacks.
BAKE: Create decadent baked treats
and desserts.

OPERATING BUTTONS

Control the output for the drawer
1
on the left (Zone 1).
Control the output for the drawer
2
on the right (Zone 2).
TEMP arrows: Use the up and down arrows
to adjust the cook temperature before or
during cooking.

BEFORE FIRST USE

1
Remove and discard any packaging material, promotional labels and tape from the unit.
2 Remove all accessories from the package and read this manual carefully. Please pay
particular attention to operational instructions, warnings and important safeguards to
avoid any injury or property damage.
3 Wash the drawers and crisper plates in hot, soapy water, then rinse and dry thoroughly.
The drawers and crisper plates are the ONLY dishwasher safe parts. However to extend
the life of the drawers we recommend hand-washing. NEVER clean the main unit in
the dishwasher.
TIME arrows: Use the up and down arrows
to adjust the cook time in any function
before or during the cook cycle
SYNC button: Automatically syncs the
cook times to ensure both zones finish at
the same time, even if if they have different
cook times.
MATCH button: Automatically matches
zone 2 settings to those of zone 1 to cook
a larger amount of the same food or cook
different foods using the same function,
temperature and time.
START/STOP dial: Rotate the dial from side
to side to select desired function. During
cook cycle, press dial for START/STOP.
Power button: The
button turns the
unit on and also shuts it off and stops all
cooking functions.
STANDBY MODE: After 10 minutes with no
interaction with the control panel, the unit
will enter standby mode.
HOLD MODE: Hold will appear on the
unit while in SYNC mode. One zone will
be cooking, while the other zone will be
holding until the times sync together.
ninjakitchen.eu
6

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières