Cooking In A Single Zone; Max Crisp; Air Fry - Ninja Foodi MAX AF400EU Notice D'utilisation

COOKING IN YOUR AIR FRYER – CONT .
ENDING THE COOK TIME IN ONE
ZONE (WHILE USING BOTH ZONES)
1 Select the zone you would like to stop.
2 Press START/STOP to end cooking.
3 "End" will appear on the display.
Cooking will continue in the other zone.
PAUSING COOKING
Cooking will automatically pause when
a drawer is removed. Re-insert drawer to
resume cooking.
WHEN USING IN SYNC or MATCH MODE
If you open a drawer, the other drawer will
automatically pause so that cooking will still
finish at the same time. Reinsert drawer to
continue cooking in both zones.
NOTE: If during cooking when using
SYNC a drawer is removed for longer
than 2 minutes, then the program will be
cancelled. You will need to re-program
each zone to resume cooking.
9
ninjakitchen.eu

COOKING IN A SINGLE ZONE

To turn on the unit, plug the power cord into a
wall socket, then press the power button.

Max Crisp

NOTE: There is no temperature adjustment
available or necessary when using the Max
Crisp function. The temperature is preset
to 240°C
1 Install crisper plate in the drawer, then
place ingredients in the drawer, and insert
drawer in unit.
2 The unit will default to zone 1 (to use
zone 2 instead, select zone 2). Select
MAX CRISP.
3 Use the TIME arrows to set the time in
1-minute increments up to 30 minutes.
Press the dial to begin cooking.
4 When cooking is complete, the unit will
beep and "End" will appear on the display.
5 Remove ingredients by tipping them out
or using silicone-tipped tongs/utensils.

Air Fry

NOTE: The temperature is preset to 200°C.
1 Install crisper plate in the drawer, then
place ingredients in the drawer, and
insert drawer in unit.
2 The unit will default to zone 1 (to use
zone 2 instead, select zone 2). Select
AIR FRY using the dial.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the dial to begin cooking.
NOTE: During cooking, you can remove
the drawer and shake or toss ingredients
for even crisping.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by tipping
them out or using silicone-tipped
tongs/utensils.
ninjakitchen.eu
10