Sedus netwin Mode D'emploi page 9

C Angle of the backrest
Adjusting the backrest dynamically:
®
release it Lean against the backrest
2.
Locking the backrest into position:
®
reaches the desired angle
lock the backrest into position
Release the backrest lock when the chair is not in use
®
D Strength of the backrest pressure
Adjusting the backrest dynamically (C)
®
1.
on the seat and backrest
downwards until the desired position is achieved (greater backrest
pressure) or upwards (lesser backrest pressure)
E Depth of the seat (optional)
Press the finger plate and hold it fast
®
1.
desired position
Press the lever down and release it to
2.
Crank the quick adjustment mechanism
3.
Release the finger plate, and the seat will engage
3.
Pull the lever upwards and
1.
The backrest is free-flowing
3.
Lean back until the backrest
1.
Exert only slight pressure
2.
Push the cushion to the
2.
3