VENTILAIRSEC VMI PUREVENT VISION'R Série Notice D'utilisation page 22

Error codes shown on the control unit
When the machine detects a fault or an error in the system operation, the control unit displays this
information.
Possible fault types:
On-screen display
Contact your installer or your maintainer to correct these faults.
LED colour indications
The VMI® PUREVENT VISION'R appliance and the control unit have an indicator that changes colour
according to the operational status. If the colour changes from BLUE or flashes, refer to the table
below:
LED colour
Flashing blue
Yellow
Red
Faulty heating resistors
Fault with one or more air quality sensors
Faulty control unit sensor
Faulty machine probe
Multiple faults detected
Information
The control unit batteries are flat.
The filter is clogged.
The machine has detected a fault.
Faults
Faulty motor
Change the batteries..
Change the filter.
Check the error code shown on
Contact the technical
Remedy
the control unit.
department.
22