Télécharger Imprimer la page

ASROCK P45R2000-WiFi Guide D'installation Rapide page 34

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3.
Use the eSATAII device cable to connect eSATAII device and the eSATAII port of
the I/O shield.
Connect one end of the eSATAII
device cable to eSATAII device
2 . 1 1
2 . 1 1 Serial A
2 . 1 1
Serial A
Serial AT T T T T A (SA
Serial A
A (SAT T T T T A) / Serial A
A (SA
A (SA
2 . 1 1
2 . 1 1
Serial A
A (SA
Installation
Installation
Installation
Installation
Installation
P45R2000-WiFi / P45R2000 adopts Intel
Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID
10, RAID 5, and Intel Matrix Storage) functions. P45TurboTwins2000 adopts Intel
ICH10 south bridge chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII)
hard disks. You may install SATA / SATAII hard disks on this motherboard for internal
storage devices. This section will guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0, RAID 1, RAID 10 or Intel Matrix Storage
function, you need to install at least 2 SATA / SATAII hard disks. If you
plan to use RAID 5 function, you need to install at least 3 SATA / SATAII
hard disks.
2. It is not recommended to switch the "Configure SATAII as" setting after
OS installation.
2 . 1 2
2 . 1 2
Driver Installation Guide
Driver Installation Guide
2 . 1 2
2 . 1 2 Driver Installation Guide
2 . 1 2
Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
3 4
3 4
3 4
3 4
3 4
ASRock P45R2000-WiFi / P45R2000 / P45TurboTwins2000 Motherboard
Connect the other end of the eSATAII device
cable to eSATAII port of the I/O shield
A) / Serial AT T T T T AII (SA
A) / Serial A
A) / Serial A
AII (SAT T T T T AII) Hard Disks
AII (SA
AII (SA
A) / Serial A
AII (SA
®
ICH10R south bridge chipset that supports
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
®

Publicité

loading

Ce manuel est également adapté pour:

P45r2000P45turbotwins2000