ASROCK P45R2000-WiFi Guide D'installation Rapide page 21

Les langues disponibles

Enjoy the benefit of CrossFire

Different CrossFire

feature. In below procedures, we use Radeon 2600XT as the example graphics

card. For other CrossFire

future, please refer to ATI

Step 1.

There is one ASRock SLI/XFire Switch Card factory-mounted on this

motherboard. This card served as a switch between the default mode (x16)

and CrossFire mode (x8 / x8). ASRock SLI/XFire Switch Card is factory-mounted

with its default mode (x16) side toward the retention slot base.

Step 2.

To change it to CrossFire Mode, you need to reverse the direction of ASRock

SLI/XFire Switch Card. Please simultaneously pull open both the retention

arms that hold the card in position. The card itself will spring away from the

retention slot. Take it out gently by holding its edges, and keep away from

touching the connectors (Golden Fingers).

Step 3.

Reverse the card direction so as to have the "X8 / X8 MODE" wording side

toward the retention slot base. Insert the card into the bottom of the base.

ASRock P45R2000-WiFi / P45R2000 / P45TurboTwins2000 Motherboard

cards may require different methods to enable CrossFire

cards that ATI

has released or will release in the

graphics card manuals for detailed installation guide.

2 1

P45r2000 P45turbotwins2000