Install Menu - Tech Line TL-26LC741 Mode D'emploi

be adjusted correctly. If you set Normal, screen ratio
may expand.
Ext Out
Press " " or " " button to select Ext Out. Use " " or
" " button to set the Ext Out as On or Off.
Note :
For copying from a DVD or VCR device, you should choose
desired source from source menu and turn "On" to EXT Out
from feature menu.
Ext Out should be On in order to use Timers function in the
DTV mode.

Install Menu

Program
Press " " or " " button to select Program. Use " "
or " " button to select the program number. You can
also enter a number using the numeric buttons on the
remote control. There are 200 programme storage
between 0 and 199.
Band
Band can be selected either C or S. Press " " or "
" button to set Band.
Channel
Channel can be changed by " " or " " button or
numeric buttons.
Colour System
Press " " or " " button to select Colour System. Use
" " or " " button to change the colour system to PAL,
PAL 60, SECAM or AUTO.
Sound System
Press " " or " " button to select Sound System.
Press " " or " " button to change the sound system
to BG,DK, I, L or L'.
Fine Tune
Press " " or " " button to select Fine Tune. Press "
" or " " button to adjust the tuning.
Search
Press " " or " " button to select Search. Use " "
or " " button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. " Stored... " will be
displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the Install menu.
Colour System
Press " " or " " button to select Colour System . Use
" " or " " button to change the colour system to PAL,
SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
Store
Press " " or " " button to select Store Program .
Press " " or "OK" button to store the settings.
" Stored... " will be displayed on the screen.
Program Table
Select Program Table by pressing " " or " " button.
Press " " to display Program Table:
English - 55 -