Technibel argo AQUA UNIT Mode D'emploi page 4

EG
• To turn off the unit, press and hold the button
sequentially:
note: Once the unit has been switched off, the water pump may continue to operate in order to prevent frost in
the pipes.
2.2 - setPoint moDifiCation (retUrn Water to tHe Unit)
If the fixed setpoint has been selected (P05 = 1, see parameter list), you can set the setpoint manually.
To change the setpoint, press the buttons s or t until the desired setpoint is displayed in the second line.
2.3 - KeYBoarD loCKeD / UnloCKeD
To lock the keyboard so that it is not possible to accidentally press the buttons, press the buttons s and t simul-
taneously for 3 seconds.
The following screen will appear:
Repeat the same operation to unlock the keyboard. The following screen will appear:
2.4 - Defrost
During the defrost cycles of the unit, the following screen will appear:
The first line will display the return water temperature.
for 3 seconds. The following two screens will appear
- - - -
- - - -
K E Y B O A R D
L O C K E D
K E Y B O A R D
U N L O C K E D
3 5 . 0 ° C
D E F R O S T
4