Whirlpool W10882520 Instructions D'utilisation page 5

3.
Install pads on stacking platform
Turn the platform upside down. Install front and rear plastic
pads in positions shown. Make sure they are also oriented as
indicated. Then install the rubber pads over the plastic pads
as shown.
4.
Install brackets
Bottom side up
Slide lower brackets (A) into tracks as shown. Fasten them
in place using upper brackets (C) and screws provided.
Bottom side up
A
C
Rear
5.
Remove screws from top rear
of washer
6.
Flip over stacking platform and place
on top of washer
Make sure lower bracket holes are aligned with screw holes
on top rear of washer.
7.
Fasten stacking platform to top
of washer
Use screws removed in Step 5 to fasten platform to washer.
Top side up
5