nedis HPBT5055BK Mode D'emploi page 6

Pairing the earphones to a Bluetooth audio
source
1. Take the earphones out of the charging case. The earphones
switch on automatically.
4 Tap and hold both earphone touch controls A
seconds to manually switch on the earphones.
2. The status indicator LED A
pairing mode is active.
3. Enable bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT5055WT / HPBT5055BK" from the list of
available Bluetooth devices on your device.
Charging the product (image B)
1. Plug he USB-C cable A
charging case.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4. The charging indicator LED A
progress of the battery.
Green 31 % - 100 %
Yellow 11 % - 30 %
Red 1 % - 10 %
5. Place the earphones into the respective slots A
close the lid A
6. The status indicator LED A
red.
5
7. A
switches off when the earphones are fully charged.
4
The earphones and the charging case can charge
simultaneously.
Switching on the product
• Tap and hold A
product on or off.
Making phone calls
With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
• To answer an incoming call, tap A
• To reject an incoming call, double tap A
• To end a call, tap A
• To cancel an outgoing phone call, tap A
5
q
into the USB-C port A
q
into a computer or power
1
to charge the earphones.
5
6 8
and A
6 8
or A
6
starts blinking to indicate
4
indicates the charging
on the earphones lights up
for 3 seconds to switch the
6 8
or A
6
.
6
6 8
A
for 3
2
of the
3 9
A
and
.
8
or A
.
8
or A
.