Setting The Clock - VDO Cyclecomputing MS Notice D'utilisation Abrégée

Selecting the sensors
(Activating the heart rate/cadence function)
SET – Open the menu:
– Scroll from Total values to Settings:
– Open the settings menu:
– Scroll to Sensor in the menu:
– Start the setting:
– Change the setting:
TPC BIKE
– Confirm the selection:
– Exit the settings menu:
44
Press and hold the SET button
Press the BIKE or TPC button
Press the SET button
Press the BIKE or TPC button
Press the SET button
Press the BIKE or TPC button
Press the SET button
Press and hold the SET button

Setting the clock

SET – Open the menu:
– Scroll from Total values to Settings:
– Open the settings menu:
– Scroll to Clock in the menu:
– Start the setting:
– Change the setting:
TPC BIKE
– Confirm the selection:
– Exit the settings menu:
Press and hold the SET button
Press the BIKE or TPC button
Press the SET button
Press the BIKE or TPC button
Press the SET button
Press the BIKE or TPC button
Press the SET button
Press and hold the SET button
45