Garmin StreetPilot 2720 Manuel D'utilisation page 9

3. Slide the bottom of the StreetPilot into the
mounting base until it clicks into place.
4. Slide the base's locking lever to the right, in the
locked position.
Locking lever
5. Plug the power adapter into an available 12-Volt
receptacle in your vehicle.
6. Route the cable so it does not interfere with
vehicle operation.
StreetPilot 2720 Owner's Manual
Removing the 2720 from the Mount
1. Slide the locking lever to the left, to the unlocked
position.
2. Press the release tab down.
3. Slide the 2720 out of the mounting base.
G r
ettinG eady
Release tab
EN-