Disney MD 3722 Mode D'emploi page 25

Disney-TV-Princess_MD3723-22.book Seite 13 Montag, 14. Juni 2004 4:33 16
Reallocating programme numbers
You can change the allocation of programme numbers manually:
• Select CH ALLOCATION and confirm with
. The programme number of the currently
displayed station appears at upper right ("20"
in the illustration).
• With the
tion for which you wish to change the pro-
gramme number.
• Confirm with
CATION" appears marked in pink.
• With the
("7" in the illustration) for the current station and confirm with
. In this example, the programme number is changed from 20
to 7.
Manual station search
If you find, after automatic station search, that a station is missing, you can set this manually.
• Select MANUAL from the CH TUNING
menu and confirm with
station search window will appear.
• Using the
her PAL or SECAM-L.
• Confirm with
tion is marked pink and F.TUNE + - (fine tune) is displayed.
• Press or
backwards. The progress indication moves until a station is found
and then stops. The programme number (CH) indication appears,
marked in pink.
- If you wish to save this station, allocate the programme number.
- If you are looking for another station, press
again..
• You can fine-tune the picture with the – F.T. + buttons on the remote control. The arrows
above the band indication blink each time a button is pressed.
• To allocate the programme number, press
the desired programme number (CH 1, CH 2, ...) appears.
The station is now stored under the desired programme number.
• To close the menu, press MENU again.
buttons, select the sta-
. The programme number following "CH ALLO-
buttons, select the new programme number
. The manual
buttons, select eit-
. The white band indica-
to start manual station search forwards or
or
repeatedly until
GB-13