Starting; Working Modes - Watts BT-TH02 RF Manuel D'utilisation

Masquer les pouces Voir aussi pour BT-TH02 RF:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
ENGLISH
If the RF signals weren't received correctly,
check the installation (Position, distance...)
or restart the RF pairing rules to be sure.
You may have to use a Watts RF repeater if
you want to extend the RF range.
Please note that this is not possible to
make a direct RF pairing between the
BT-TH02 RF and a BT RF thermostat. If
you want to use a BT RF thermostat in a
room, you should pair the RF thermostat to
the Central Unit BT-CT02 RF, then pair one
or several BT-TH02 RF to the Central Unit.

4.2 Starting

The thermostatic head is now ready to
work with the Central Unit. The default
working mode will be the mode imposed
by the Central Unit.
In case of Automatic mode
gram can be changed from the thermostatic
head, the program is directly set inside the
Central Unit (see Central Unit leaflet). The
following screens can be viewed:
Setting View
Clock View
EN
, no pro-
Note: the time will be also sent by the
Central Unit, then all your installation will be
synchronized with the same time.
At any time, when the backlight is off, press
any key to light-up the backlight, and then
press another time the ( ) key to switch the
view between the setting temperature and
the time values. The days are not shown
anymore as no programmation is available
in the thermostatic head. Programmation is
only possible inside the Central Unit.
4.3

Working modes

With the Central Unit, the Clock update
and program modes are note available
anymore as setting time values and pro-
gram values are directly configured in the
Central Unit.
The following modes are available; refer
to stand-alone version chapters for more
explanations
Timer / Booster mode
Manual mode, comfort
Automatic mode
The thermostatic head will follow the pro-
gram selected on the Central Unit.
Manual mode, reduced
Manual mode, Antifreeze
The anti-freeze temperature is set by the
Central Unit (see the leaflet of the Central
Unit to change the anti-freeze value of your
installation)
OFF mode
15

Publicité

Table des Matières
loading

Table des Matières