Publicité
Les langues disponibles
Les langues disponibles
Mobile printing
Method 1: HP Smart
Use the HP Smart app to set up, print, and more.
1. Scan the QR code or go to 123.hp.com.
2. Install the HP Smart app.
3. Run the HP Smart app and follow the onscreen instructions to connect,
set up, print, and more.
Method 2: Wi-Fi Direct (wireless models only)
Wi-Fi Direct allows Wi-Fi capable devices, such as smart phones, tablets, or
computers, to make a wireless network connection directly to the printer
without using a wireless router or access point. Connect to the printer's Wi-Fi
Direct signal the same way Wi-Fi capable devices are connected to a new
wireless network or hotspot.
Enable Wi-Fi Direct
To set up Wi-Fi Direct from the control panel, complete the following steps:
1. On the printer control panel, press the Setup
Network Setup menu.
2. Open the following menus:
•
Wi-Fi Direct
•
On/Off
3. Touch the On menu item.
Use the scan feature
Use the HP Scan software on your computer to start a scan job at the printer.
Windows
Click Start, select Programs or All Programs, select HP, and then select
HP Scan.
Troubleshooting
Wireless connection troubleshooting
Verify that the printer is within the range of the wireless network. For most networks, the printer must be within 30 m (100 ft) of the wireless access
point (wireless router). A USB cable might be required for temporary connection between the printer and the computer. To ensure that the wireless setup
information synchronizes correctly, do not connect the USB cable until prompted to do so.
Follow these steps to restore the network settings:
1. Remove the USB cable from the printer.
2. Press and hold the Wireless
the Wireless
button. Printer will restore network default automatically and restart.
3. When the Ready
LED is on, continue to install the software.
User guide and additional support resources
The user guide includes printer usage and troubleshooting information. It is
available on the web:
www.hp.com/support/ljM182MFP.
Go to
Check for firmware updates
1. Go to www.hp.com/support/ljM182MFP.
2. Select a printer or category from the list, and then click Drivers.
3. Select the operating system, and click the Next button.
4. Select Firmware, and click the Download button.
button, and then open the
button on the printer control panel. When the
Discover the printer
1. From the mobile device, turn on the Wi-Fi, and search for wireless
networks.
2. Select the printer as shown on the printer control panel.
Example printer name: Direct-bb-HP M182 Laserjet
Learn more about mobile printing
For further information about these and other
operating systems (Chrome/Google Cloud Print),
go to
www.hp.com/go/LaserJetMobilePrinting
or scan the QR code.
OS X
Go to the Applications folder and open HP Smart.
and the
Ready
LED
Attention
Wireless printing
For more information about wireless
printing and wireless setup, go to
www.hp.com/go/wirelessprinting.
5
start blinking simultaneously, release
LED
Publicité
