HP LaserJet Pro MFP M125 Guide D'installation
Masquer les pouces
Voir aussi pour LaserJet Pro MFP M125:
- Guide de l'utilisateur (138 pages) ,
- Guide de l'utilisateur (139 pages) ,
- Guide de l'utilisateur (135 pages)
Manuels Connexes pour HP LaserJet Pro MFP M125
Sommaire des Matières pour HP LaserJet Pro MFP M125
- Page 1 LaserJet Pro MFP M125-M126 M125-M126 *CZ172-91006* *CZ172-91006* CZ172-91006 Installation Guide Guide d'installation Guía de instalación Guia de instalação 安裝指南 מדריך התקנה Lea esto primero...
- Page 2 15° - 30°C (59° - 86°F) 10% - 80% Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the product. Choisissez un support solide et un endroit propre, bien aéré et à l'abri du rayonnement direct du soleil pour placer votre produit. Busque una superficie sólida en un lugar bien ventilado, sin polvo y alejado de la luz solar directa para colocar el producto.
- Page 5 1. Connect the power cord between the product and a grounded AC outlet. Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The product uses either 100-127 Vac or 220-240 Vac and 50/60 Hz. CAUTION: To prevent damage to the product, use only the power cord that is provided with the product.
- Page 6 1. Conecte o cabo de alimentação entre o produto e a tomada CA aterrada. Verifique se sua fonte de alimentação é adequada para a classificação de tensão do produto. A classificação de tensão está na etiqueta do dispositivo. O dispositivo utiliza 100-127 Vca ou 220-240 Vca e 50/60 Hz.
- Page 7 Download from the Web: If the CD is not available, or if your computer does not have an optical drive, download the software installation files from the Web: 1. Go to www.hp.com/support/ljMFPM125series www.hp.com/support/ljMFPM126series 2. Click Drivers. 3. Select the operating system, and click Next.
- Page 8 .אתר או הורד את קבצי התקנת התוכנה .התקנה מתקליטור המוצר: קבצי ההתקנה של התוכנה מסופקים בתקליטור שהגיע עם המוצר :הורדה מהאינטרנט: אם התקליטור אינו זמין, או אם במחשב שלך אין כונן אופטי, הורד את קבצי ההתקנה של התוכנה מהאינטרנט www.hp.com/support/ljMFPM126series או www.hp.com/support/ljMFPM125series 1.
- Page 9 Software installation for Windows wired networks: Connect the network cable to the product and the network. Insert the product CD into the computer, or launch the software installation .exe file that you downloaded from the Web, and follow the on-screen instructions. Installation is complete. NOTE: If the installation program does not detect the product on the network, you might need to enter the IP address manually.
- Page 10 Software installation for Windows wireless networks (wireless models only): Insert the product CD into the computer, or launch the software installation .exe file that you downloaded from the Web, and follow the on- screen instructions. Installation is complete. NOTE: If the installation program does not detect the product on the network, you might need to enter the IP address manually. The IP address is listed on the first page of the configuration report.
- Page 11 Software installation for Windows USB connections: 1. Insert the product CD into the computer, or launch the software installation .exe file that you downloaded from the Web, and follow the on- screen instructions. If the installation program does not start automatically, browse to the CD drive. Double-click the Setup.exe file to run the program and install the product.
- Page 12 Software installation for Mac OS X: 1. If you are using a USB or a wired network connection, connect the cable now. 2. Insert the product CD into the computer, or launch the DMG file that you downloaded from the Web, and follow the on-screen instructions. Installation is complete.
- Page 13 Software installation for Mac wireless networks (wireless models only): Insert the product CD into the computer, or launch the DMG file that you downloaded from the Web, and follow the on-screen instructions. Installation is complete. NOTE: If the installation program does not detect the product on the network, you might need to enter the IP address manually. The IP address is listed on the second page of the configuration report.
- Page 14 Network models only: To use the HP ePrint feature, first enable HP Web Services by opening a Web browser and typing the product IP address into the address field. (The product IP address is displayed on the product control panel.) On the Web page that opens, click the HP Web Serv- ices tab, and then click Enable.
- Page 15 IP do produto no campo de endereço. (O endereço IP do produto é exibido no painel de controle do produto.) Na página da Web que abrir, clique na guia Serviços da Web HP e, em seguida, clique em Ativar. Para obter mais informações sobre o HP ePrint, acesse o site HP Connected: www.hpconnected.com.
- Page 16 Les informations contenues dans ce document peuvent être modifiées sans préavis. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Les seules garanties pour les produits et services HP sont décrites Nothing herein should be construed as constituting an dans les déclarations de garantie expresses accompagnant ces mêmes...