Programmed Play; Mode; Random; Aux In Socket - Bigben CD60 Mode D'emploi

NOTE:
• If a disc is inserted the wrong way around, respectively if no disc is inserted, then "No" appears on
the display.

Programmed Play

This can be used to program any desired sequence of tracks.
Up to 20 tracks can be programmed for disc play in any order. Be sure to press the "STOP" button
before use.
1. Press the "PROGRAM" button, the display will show "01" and flash.
2. Select desired track by using the "SKIP +" or "SKIP -" button.
3. Press the "PROGRAM" button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the "PLAY / PAUSE" button to play the
disc in the order you have programmed.
6. Press the "STOP" button twice to terminate programmed playback.

MODE

Press the "REPEAT" button before or during playing CD disc, each press switches the mode function
as follows:
1. REPEAT 1 (The repeat indicator is flashing.)
2. REPEAT ALL (The repeat indicator is steadily on.)
3. NORMAL PLAYBACK
REPEAT 1 REPEAT ALL

RANDOM

Press the "RANDOM" button when playing CD. All tracks will be played randomly.
NOTE:
The "REPEAT" and "RANDOM" function can only be used in CD mode.

AUX IN socket

Via this socket you can also hear the sound of other playback devices such as MP3 Players,
CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo jack plug to the AUX-IN socket.
2. Press the "FUNCTION" button to select the "AUX-IN" mode.
3. The display will show "AU".
4. You will hear the sound playback from the external device through the loudspeakers. You may
adjust the volume with "VOL + /VOL–" button. The CD buttons are not functional.
5. For the remaining procedure please see the operating instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable level.
NORMAL PLAYBACK
- EN 6 -