Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Change the Battery of the Indoor Unit (optional)
The unit requires 4×AA batteries
1. Open the battery door.
2. Insert four AA batteries into the compartment.
3. Snap the battery compartment door back into place.
Note: When the low battery indicator keeps flashing, it is
time to replace the batteries. Alternatively, use a mains
adaptor as an option (contact 01707 387602).
Install and Change the Battery of the Door bell
Install the 23A 12V battery into the door bell
To replace the battery, unscrew the door bell from the
wall, and unscrew the one screw located on the back to
gain access to the battery compartment. Replace the
battery then replace the battery compartment flap and
screw and remount.
Note: Do not use a rechargeable battery. Do not put the
used battery into the household rubbish, pay attention to
regulations regarding battery disposal.
4
Publicité
