Beta 682 Mode D'emploi page 12

INSTRUCTIONS FOR USE
6. Click on the "Calibration certificate" icon and follow the instructions contained in (Fi
gure 6).
Click on Calibration
Certificate icon
Dynatester, serial number
and certificate number
Readings are retrieved
from database
The box will change colour according to the minimum and maximum readings.
The box colour will be as follows:
- yellow if the reading is lower than the minimum parameter
- green if the reading lies between the minimum and maximum parameters
- red if the reading is higher than the maximum parameter
12
Inspector
Data retrieved from
initial database
Confirm
Calibration readings are auto-
matically imported
EN
Certificate number
Direction
Figure 6