Beta 682 Mode D'emploi page 10

INSTRUCTIONS FOR USE
3. After finding the item, click on the "sample" folder with the right mouse button, and
select "add tool" (Figure 3.1).
Clicking on "add tool" will allow a window to opened; you will then be asked to enter
the serial number of the torque wrench (Figure 3.2).
Under the pull-down menu to open, select the relevant item (Figure 3.3).
Open pull-down menu and select item
10
Click with right mouse button
Click with left mouse button
Enter serial number
EN
Figure 3.1
Figure 3.2
Figure 3.3