Franke PRI 5 4GAV-TC Manuel D'utilisation page 14

PREVIOUS DOCUMENT
Special attention must be given to ventilation. The appliance may have hot parts during
operation: keep children and the handicapped distant. Use of gas-fired cooking appli-
ances generates heat and humidity in the room where they are installed. Make sure the
room is properly ventilated. Keep natural ventilation openings free and open or install a
mechanical ventilation device (extraction hoods with exhaust ducts). Intense and pro-
longed use of the appliance may require supplementary ventilation such as opening a
window or taking measures for more efficient ventilation by, for example, increasing fan
powers.
Preparing the cabinet
IMPORTANT: The Franke low-profile hob requires a worktop with a thickness of at least
40 mm.
If the worktop is lower than 40 mm, for a correct installation put special shims near the
hooks.
INSTALLING model PRI 5 4GAV-TC (970x530 mm)
Prepare the cut-out in the worktop with the following
dimensions:
When installing the model PRI 5 4GAV-TC hob on a 900 mm base the hob can be centered
on the base (see fig. 2).
fig. 2
INSTALLING model PRI 4 4GAV (970x530 mm)
Prepare the cut-out in the worktop with the following
dimensions:
14