Operating Manual - Cherry DW 8000 Mode D'emploi

OPERATING MANUAL

CHERRY DW 8000 – Wireless Desktop
Congratulations ...
CHERRY has developed and produced innovative
input systems for computers since 1967. You can
now experience the difference in quality, reliabil-
EN
ity and design with your new favorite accessory.
Always insist on original CHERRY products.
For information on other products, downloads
and much more, visit us at www.cherry.de.
Your CHERRY DW 8000 stands out especially due
to the following features:
• Infrared sensor with adjustable resolution for
precise work (1000/2000 dpi)
• 2.4 GHz wireless technology
• Abrasion-proof laser key cap lettering
• You can configure the mouse buttons as well
as the F-keys and Hotkeys using KeyM@n
software (as a free download at:
www.cherry.de > Help & Support >
Downloads > CHERRY DW 8000)
1 Connecting the device
• The keyboard and the mouse are
ready to use without installing
software.
• Use the receiver on a USB 2.0 connection
if possible.
1 Connect the receiver to the USB socket in the
PC/laptop.
2 Switch the On/Off switch on the back of the
keyboard and on the bottom of the mouse to
ON.
8
2 Adjusting the
sensitivity of the mouse
(dpi number)
You can change the resolution of the mouse
sensor between 1000 and 2000 dpi for precise
work.
• Press the left and right mouse button at the
same time and turn the scroll wheel.
Scroll down = 1000 dpi/
Scroll up = 2000 dpi
dpi
1000
2000
3 Battery status
When the battery status LED
particular device flashes red, you can still work
for a while longer. But you should replace the
batteries soon.
4 Tips
4.1 Surface under the mouse
A bright, structured surface under the mouse
saves energy, increases effectiveness and
ensures optimum motion detection.
A reflective surface is not suitable for using the
mouse on.
4.2 Cleaning the devices
CAUTION: Damage may be caused
by harsh cleaning agents or liquids
in the devices
• Do not use solvents such as gasoline or
alcohol and scouring agents or scouring
sponges for cleaning.
• Prevent liquids from entering the devices.
• Do not remove the keycaps of the keyboard.
1 Switch the devices off (switch to OFF).
2 Clean the devices with a slightly damp cloth
and some mild cleaning agent (e.g. dish-
washing liquid).
3 Dry off the devices with a soft, lint-free cloth.
4.3 RSI syndrome
RSI stands for "Repetitive Strain
Injury". RSI arises due to small
movements continuously repeated
on a
over a long period of time.
Typical symptoms are discomfort in the
fingers or neck.
• Set up your workspace ergonomically.
• Position the keyboard and mouse in such a
manner that your upper arms and wrists
are outstretched and to the sides of your
body.
• Take several short breaks, with stretching
exercises if necessary.
• Change your posture often.