Epson B-500DN Guide D'installation page 3

Installing the B-500 on Your Network
Follow these instructions to install the software and connect the B-500DN to
your network.
First, make sure you install the ink cartridges and load paper as described on the
Start Here sheet that came with the printer. Then follow the steps below for
Windows ® or on page 8 for Macintosh
Windows Network Connection
The software works with Windows 2000, Server 2003, XP, XP Professional x64
Edition, and Windows Vista
RJ-45 network cable (not included).
1. Turn off the printer.
2. Connect one end of the cable to the printer's Ethernet port. Then connect
the other end to your network switch or hub.
3. Turn on the printer.
4. Insert your printer CD.
With Windows Vista, if you see the AutoPlay window, click
. When you see the User Account Control screen, click
Epsetup.exe
.
Continue
® .
® . Before you begin, make sure you have a standard
Run
3