Maintenance Instructions; Removal Of Clogs And Locks; Storage And Cleaning; Customer Service - VITO GARDEN VIAS3000A Mode D'emploi

EN
4. Squeeze the bag and put it back
into the machine;
Use an anti dust mask and
goggles when emptying the
collection bag.
5. MAINTENANCE
INSTRUCTIONS
When the machine is not in use and
before carrying out any maintenance
or replacement of accessories,
disconnect the power cord from the
power outlet.
The machine has been designed to
operate over a long period of time with
minimal maintenance.
However, normal use of the bag
causes wear and tear over time. A
worn or deteriorated bag allows small
objects to pass through the bag,
posing a risk of injury to the user and
others. Replace it when necessary.
5.1 - REMOVAL OF CLOGS AND
LOCKS
Leaves, branches or other objects can
clog the suction/blow pipes and block
the fan inside the machine. When a
clog or locks occurs:
1. Turn off the machine;
2. Disassemble the suction/blow pipes
and remove the collection bag;
3. Remove any objects that may be
blocking the fan and clogging the
tubes;
4. Refit the tubes and place the
collection bag;
Do not use water hoses and
pressure tips to clean the
machine.
26

5.2 - STORAGE AND CLEANING

Cleaning
After each use, clean all components
of the machine and empty the
collection bag. Clean the machine with
a clean, damp cloth or blow with low
pressure compressed air.
According to frequency of use, wash
the collection bag with soap and water
and allow it to dry naturally.
Careful handling protects the machine
and extends life.
Storage
Store the machine in a clean, dry place
out of the reach of children.
The ideal storage temperature is
between 5 and 30 °C. Store the
machine in its original packaging
6. PROTECTION OF THE
ENVIRONMENT
The packaging is made of
recyclable materials, which
can be disposed on local recycling
points.
Never place power tools in
the domestic waste!
According to the European Directive
2012/19/CE on electrical
electronic equipment waste and its
transposition into national law, power
tools must be collected separately
and delivered to the collection sites
provided for this purpose.
You can obtain information regarding
the disposal of the compressor through
the person in charge for the recycling
in your city.

7. CUSTOMER SERVICE

Phone: 00351 256 331 080
E-mail: sat@centrallobao.pt
Website: www.centrallobao.pt
and