Safety Instructions - strapex STP 63 Mode D'emploi

3
klsf klsd
lksdf kl
kl sdllk kl sd
fkl klk kl sdaf
asdf klk kl kl
ksldafk kl kl
kl klkl sdaf lk
kl kl klkl l lk
6 8 10
4 12
2 14
0 16
05.11

SAFETY INSTRUCTIONS

Inform yourself!
Read the operating in-
structions carefully.
Protect yourself!
When operating the tool,
wear eye, face and hand
protection (cut-proof
gloves).
Warning:
Strap will snap forward!
When cutting the strap,
hold the upper portion
and stand safely away
from the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with
the strap while it is ten-
sioned. The strap could
break!
Caution:
Danger of squeezing!
Do not put your fi ngers
into the tension wheel
area.
Caution:
Only strap packed
goods!
Do not put hands or other
parts of the body bet-
ween the strap and the
package during the strap-
ping process.
Do not exceed the air
pressure!
Do not exeed the recom-
mended air pressure.
Use safety coupling!
For connecting the air
hose to the tool, use only
a safety coupling.
Original
Strapex
Use for the intended purpose
The tool is intended for strapping fl at packages, pallet
loads etc.
This tool was designed and manufactured for safe
handling during the strapping operation.
The tool processes steel straps only.
Possible misuse
The use of plastic straps is not possible.
Servicing
The following maintenance work must be carried out
at regular intervals, varying with working conditions
and workload:
– daily check of compressed air pressure (5–6 bar)
– regular check the maintenance unit (oil level, water
separator and fi lter)
– clean the tool regularly (see chapter 7.7)
– check the condition of the tool at regular intervals
for defects or worn parts. Never use a tool that has
defective or worn parts.
Strapex STP 63
Do not use a bottled
air or gas source!
Do not operate this tool
by using a bottled air or
gas source.
For suspending the
tool, only spring balan-
cers which conform to
the safety regulations
should be used.
Original Strapex spare
parts must be used
exclusively!
Not using original spare
parts will dissolve the
warranty and the liability.
15