Product Description; Designated Use; Restrictions Of Use; Technical Data - erba 33607 Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 - Spindle lock
2 - RPM dial with display
3 - on/off switch
4 - Handle
5 - Padholder (M14)
6 - Wool bonnet w. hook & loop fastener

3. DESIGNATED USE

The polishing machine is designed for polishing and/or sanding various surfaces. Any other use is
prohbited. The buyer accepts all liabilities, legal and otherwise, for any damage or injury resulting
from improper use of the product (i.e. any other use than the above stated designated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

Rated power:
Output:
Rpm:
Sound pressure level:
Sound power level:
Vibration on handle:
Protection class:
IP Class:
Weight:

6. NOISE EMISSION VALUES

See technical data.

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

Mount the handle (4) to the machine using the supplied screws. Make sure the handle is screwed
in place firmly.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 11
Changes, print, punctuation and other errors reserved!
230 V – 50 Hz
1200 W
0-3000 U/min
> 70 dB (A)
> 80 dB (A)
<2,5 m/s 2
II
IP 20
2,5 kg
Instruction manual
33607
Issue: 07/2017