Ecler DP 300 Manuel Utilisateur page 53

If one or more equalizers should be included, click with the left mouse button on the desired equalizer
type button. Following EQ adjustment window appears:
From this window, the equalizer type, centre frequency, gain and bandwidth can be adjusted. The
parameters correspond exactly with the previously explained ones in the DP300 unit.
Once all parameters have been adjusted, this window can be closed by clicking the "Accept" button.
If the information should be transferred to the DP300, open the Memory window from the Config menu.
Ensure that the PC is correctly connected to the DP300 and that the communication is successful.
Once this window is open, select the memory position to be overwritten and click the Store Button.
Execute the transfer to the DP300 as previously explained.
Once the transfer has ended, the process is finished. You can close the Memory window and optionally
save the current program to the PC hard drive with the Save command in the File Menu. dp:lab can be
closed by clicking on the Exit button.
53