Maintenance; Replacing Filter; Replacing Lights - Aria QR242B Manuel De L'utilisateur

Maintenance

REPLACING FILTERS
When filters need replacing, use only genuine replacement
filters available by calling our customer support team.
Replace filters that are damaged with punctures, bends, or
broken frames .
- Turn off the range hood and disconnect the power .
- Remove the used or damaged filter and replace it with a
new filter, then reconnect the power.
REPLACING LIGHT BULB
When light bulb burns out, replace tit with a 40 W E26 base
light bulb .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb counter-clockwise and pull it out to remove it.
- Push in the new bulb and turn it clockwise . Do not
release the bulb until you are sure the bulb has been
securely installed . Then reconnect the power .
- If new bulbs do not operate, ensure that they are
inserted correctly .
QR242B / QR242S / QR242W
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
Failure to replace worn out or damaged filters
will increase the risk of fire.
WARNING:
Light bulbs can become hot when turned on .
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
14