Set the desired height by undoing the ring on the holder, sliding
the telescopic stand in/out of the holder and then doing up the
ring again (max. adjustment 22 cm).
Never use the fan before it has been fully assembled!
OPERATION
Before using the device, make sure all of
the safety guidelines have been taken into
account.
Operation button (at back) to 0.
Insert the plug into the socket.
Choose the setting desired:
1 = low (pleasant breeze)
2 = average (powerful breeze)
3 = high (very powerful wind)
Back to 0 = switch off
In order to switch off, always turn the button to 0 then take the plug
out of the socket!
CHANGING WIND DIRECTION
Always switch the fan off and remove plug from socket before
changing wind direction!
Take the safety grille in both hands and turn it to the desired
direction.
The HVS14 and HVS18 can be tilted by approximately 150°, the
HVS18S can move by about 135°.
CLEANING AND MAINTENANCE
Always turn the fan off and take plug out of socket before cleaning or
carrying out maintenance work!
Open the safety grille by undoing the small screw and the clamps.
Clean the grille and fan blades with a (slightly humid) soft cloth. Do
not use a corrosive or abrasive cleaning agent! Dry everything
properly.
10